The Taulman3D filaments 

Taulman3D is known for it's exceptional filaments. The famous nylons are easy to print and extremely strong and durable.
At we have a selection of the very best: Alloy 910, Nylon 680 FDA, T-Lyne and the new Guidel!ne.

(spools are 450gr)

Taulman Alloy 910 

Alloy 910 is a significant development by taulman3D and both our chemical house and post processing company.  The goal was to provide a super material with very high tensile, yet sufficient elongation to maintain a high degree of durability.  Alloy 910, when 3D Printed comes in at 8,100 PSI Tensile and close to 12,000PSI when injection molded.

Potential uses:
Any industrial parts that are currently being made of other high tensile polymers.
Large motor mounting
Industrial vibration isolators and damping parts
High Pressure Sand Blasting resistant

Sand Blast Masking
Electroplating supports and hangers
Chemical dip and tank supports.
High end gears and cams
Chemical resistant equipment covers.


Taulman 680 FDA

Nylon 680 was developed at taulman3D to meet certain FDA criteria for clinical and other applications.
Potential uses:
There are many uses in the clinical, food and medical industries. 
As any material needs to be fully tested for each use, it will be several months before testing is complete and certified uses are noted.
Nylon 680 FDA is compatible with ethylene oxide and flash steam post processing, it is also dishwasher safe.


Taulman Guidel!ne

Guidel!ne is a unique high strength PETG based material with excellent high temperature printing capabilities. Users know that printing small features of some parts can be difficult due to thermal build-up.  Guidel!ne is much less susceptible to these thermal issues allowing for finer detail without distortion. Guidel!ne is also released as a starting point for individuals and companies wishing to obtain eventual FDA/CE certification for a device knowing that the raw material itself is listed with the FDA and has already passed specific FDA testing. Guidel!ne is sold as a raw material modified in form only into 3d printing line and most important, extruded in a manner that keeps contaminates out of the material during the cooling process, where contaminates and bacteria could be embedded in the soft extrusion.  In addition, pH and ORP levels are monitored and adjusted to maintain acceptable levels.
Medical grade ISO 10993 FDA Reg material.


Taulman T-Lyne

A unique new flexible material to the 3D printing called T-lyne that uses DuPont™ Surlyn® ionomer. T-lyne is a unique, crystal clear polyethylene co-polymer developed specifically for high durability, flexibility, unique viscosity and a wide temperature range.  Glass-like aesthetics can easily be obtained at high layer sizes using low speed and low temperatures in the range of 190 C to 210 C.  Utility style parts are easily printed faster at standard layer sizes using higher temperatures up to 245 C, depending on nozzle size.
Meets FDA 21CFR 177.1330(a) and can potentially be used in prosthetics where the most unique feature is the ability to immerse a part into hot water, make some minor adjustments, then cool the part and the part will maintain the adjustments as if it were printed in final form. 

  • -17%

    Taulman Nylon 680 FDA
    Taulman Nylon 680 FDA
    € 59,95 € 49,95
  • -13%

    Taulman T-Lyne
    Taulman T-Lyne
    € 31,95 € 27,95
© 2012 - 2017 | sitemap | rss | webwinkel beginnen - powered by Mijnwebwinkel