Hoe print je PVDF filament ?
Our Fluorinar-PVDF is easy to print on any FDM printer with a heated bed.
We offer 4 types of PVDF-Kynar® filament:
The C-types:
- Fluorinar-C (natural-white)
- Fluorinar-CB (black)
- Fluorinar-C-ESD (with Graphene, black)
The H-type
- Fluorinar-H (pure Kynar®)
C stands for copolymer and H for homopolymer (monopolymer). The difference is purity, chemical resistance and temperature resistance.
H-type is simply a bit more resistant to chemicals and a slightly higher temperature.
( If you need them : we have datasheets.)
The PVDF-C-types print very easy:
- nozzle 250ºC
- bed 100ºC
- speed 20>
- use a glass bed
- no cooling
- Elmer's purple glue (comes FREE with every order)
- you can print large objects without problems
- very small objects: print 2 simultaniously, you get nice smooth results
- heated enclosure not needed
- it prints without WARPING !!
The PVDF-H type is more challenging to print:
- nozzle 250ºC
- bed 100ºC
- speed ± 15-20mms
- use glass bed
- Elmer's purple glue
- print with a brim, the larger the print ; the larger the brim
- large prints are difficult, warping may occur
- smaller prints are easier to print
- PVDF-H likes it HOT, so NO cooling
- heated enclosure helps
PVDF-printservice
Maybe you don't want to print yourself or you do not have a 3D printer?
We can print for you. Prototypes or small production ?
Send me an email, and you get a response ASAP!
[email protected]