PVDF-C-ESD Graphene
| Beschikbaarheid: | Op voorraad (2) |
1 kg
Fluoropolymers such as PVDF have very high resistivity and are often used as an insulating water in wire and cable applications. The flow of electrons can be improved by the addition of a conductive material to the PVDF such as carbon black. However, a large amount of conductive material must be compounded with the PVDF in order to achieve electrical conductivity. This can result in a high melt flow viscosity creating a brittle material that is difficult to process by extrusion and injection molding
Electrical resistance in PVDF is greatly reduced without sacrificing production options by incorporating graphene. The result is our Fluorinar-ESD™ Kynar® PVDF filament which creates static dissipative parts while retaining the high-strength and corrosion resistance expected with PVDF.
| Print Temp Range | 240 – 250 C |
| Bed Temp Range | 100 C |
| Cooling Fan | No |
| Print Speed Range | 10 – 30 mm/s |
| Bed Adhesion | Print objects on glass bed that is prepared with a thin layer of Elmer’s Disappearing Purple Glue Stic |