Pharma Link™ Biocompatible 3D Printing Resin

Beschikbaarheid: In backorder

Pharma Link™ Biocompatible 3D Printing Resin is an ultra-pure resin designed for usage in the dental and bio-medical industries. This resin offers a wide range of uses, such the manufacturing of medical devices and components. Compatible with all commercial SLA/DLP resin printers, including the FormLabs series printers.

Pharma Link™ Biocompatible 3D Printing Resin demonstrates superior performance in all domains: superior tensile strength, elongation, flexibility, impact resistance, chemical resistance.

Meets ISO 10993-5:2009 Standards (Biological evaluation of medical devices — Part 5: Tests for in vitro cytotoxicity).

Biocompatible 3D Printing Resin is recommended for the following uses:

  • Dental Prosthesis

  • Surgical Guides

  • Biocompatible Medical Devices

  • Medical Models & Devices

  • Auditory Prosthesis

  • Bones & Cutting Guides


Materials Properties Data:

Ultimate Tensile Strength = 33.5 Mpa / 4858.8 psi (ASTM D638)

Young's Modulus = 11.1 Mpa / 1609.9 psi (ASTM D638)

Elongation at Failure = 12.79% (ASTM D638)

Clear Resin Hardness = 71.5 (Shore D)

White Resin Hardness = 73.5 (Shore D)

Dynamic Viscosity = 447.5 mPa*s @25°C / 0.00935 lb·s/ft2 @25°C (ASTM D4402/4402M)


Purchase Options:

LE - For FormLabs Printers and Printers With Older Light Sources.

HE - For Newer SLA/DLP Printers: 2K - 8K LCD Light Sources.


Clear and White variations available.

0 sterren op basis van 0 beoordelingen