|Availability:||In stock (1)|
FTD F1+ resin for Formlabs 1, 1+
The F1+ blend family comes in four colours:
Clear, White, Grey and Black. those colours correspond with the Preform software colours. So select the colour you are using and choose the V01 version.
Then select the layer height 0.02mm - 0.1mm. Since the blends are all high res especially the (deep) Black version of the F1+, the finest, most detailed results are achieved at the highest resolutions.
The White and the Black F1+ have similar properties as the Snow White and the Deep Black from our speciality family of blends.
Cleaning and post cure of the prints is similar to the normal procedures for our resins.