Formlabs 3D Printer

Our Funtodo formlabs F1+ resin is designed for the Formlabs F1 and F1+ printers. Lots of customers worldwide use the Funtodo F1+ resin daily on the formlabs printers.

Form 1, 1+

To use our F1+ resins on the Form1 or the Form1+ use the right colour setting (e.g. Grey for Grey) then choose FLGPGR01 in the software. Although the F1+ blends are tuned for 0.05mm they will work perfectly on 0.1mm as well as on 0.02mm.

Form2

The Formlabs F2 is a bit different, but the Funtodo F1+ resin is also used in this printer by a lot of users. Allthough designed for the F1 and F1+ Formlabs, it works. You need a bit of patience and testing, but it saves you money.

TIPS for Funtodo F1+ resin in the Formlabs 2:

the FTD resin is more liquid

use: open mode

 

 

  • Formlabs F1+ Black
    Formlabs F1+ Black
    € 67,50
  • Formlabs F1+ White
    Formlabs F1+ White
    € 67,50
  • Formlabs F1+ Gray
    Formlabs F1+ Gray
    € 67,50
  • Formlabs F1+ Clear
    Formlabs F1+ Clear
    € 67,50
© 2012 - 2017 3dogg.com | sitemap | rss | ecommerce software - powered by MyOnlineStore