The FTD Industrial Blend resin has been developed especially for some industrial clients who were in need for a 3D resin that is extra hard and would maintain its structural integrity while exposed to very Low and High temperatures.
Because of these properties it is one of the few 3D resins perfectly suitable for vulcanisation. 
For relatively low temperature metals like pewter or tin you can also use the FTD Industrial Blend to print your moulds and cast straight from the printed mould. Read all about it in this 
Instructable

 

FTD Industrial Blend Hardness

​The hardness of the fully cured resin is 75 shore D

 

 

 

 

 

 

 

FTD Industrial Blend Temperature Resistance

The resin has been tested from -45C to 225C
 

Chemical Resistance.

The industrial blend has been tested on about any chemical we could lay our hands on.
 

  • White spirit
  • Alcohol/Ethylalcohol
  • Thinner
  • Hydrochloric acid and various other acids
  • Sulphuric acid
  • Acetone
  • Petrol
  • Isobutanol
  • Xyleen
  • Lamp oil / Motor oil / Olive oil / Brake fluid
  • Water

 

 

  • FunToDo Industrial Blend 1kg BLACK
    FunToDo Industrial Blend 1kg BLACK
    € 55,65
  • FunToDo Industrial Blend 1kg RED
    FunToDo Industrial Blend 1kg RED
    € 55,65
  • FunToDo Industrial Blend 1kg  UN-PIGMENTED
    FunToDo Industrial Blend 1kg UN-PIGMENTED
    € 55,65
  • FunToDo Industrial Blend 5kg BLACK
    FunToDo Industrial Blend 5kg BLACK
    € 275,00
  • FunToDo Industrial Blend 5kg RED
    FunToDo Industrial Blend 5kg RED
    € 275,00
  • FunToDo Industrial Blend 5kg UN-PIGMENTED
    FunToDo Industrial Blend 5kg UN-PIGMENTED
    € 275,00
  • FunToDo Industrial Blend 10kg Black
    FunToDo Industrial Blend 10kg Black
    € 549,00
© 2012 - 2017 3dogg.com | sitemap | rss | ecommerce software - powered by MyOnlineStore