FunToDo High quality UV Resin for DLP/SLA 3D printers

All our FTD resins are designed to be ultra fast! 

Curing times of 0.5 seconds for 0.02mm layers are easily achieved on standard Dlp printers with an average light source of around 240Watts.

A broad range of reactivity!
The FTD resins have a very broad range of reactivity, it extends from the very short wavelengths of 225nm to the near/visible wavelengths of 415nm. No need to modify your expensive DLP projector! Do you have a laser SLA machine? or perhaps a DLP printer with a LED source of illumination? As long as the wavelength is between 225nm and 415nm, it will work, and it will work fast!

The Fun To Do resins have an ultra low shrinkage! 
Where 3.5% is regarded little shrinkage, we have the limited the shrinkage to 0.5%.

A natural resistance to water and most chemicals!
 Especially the Industrial blend has a high resistance to chemicals. Cured prints have been withstanding the elements and various chemicals for more than a year now!

 

© 2012 - 2018 3dogg.com | sitemap | rss | ecommerce software - powered by MyOnlineStore