FunToDo Snowwhite NXTGen

Vorige Item 9 of 11 Volgende
€ 51,85
This item is sold out.

The delivery time is 8 days.


NEW FTD Snowwhite NXTGen

Our most sold resin, you can mix it with pigments and create your own colours

NxtGen Snow White + FREE FEPfilm

 The Hardness of NXTGEN Snow White is around 80 shore D
You can use our pigment set to create any pastel colour you want. Don't add to much pigment, otherwise the properties change and too much pigment will influence the attachment of the print to the build platform as well as the max. z-layer height. 
Best way to prepare: see our pigment set

After Printing, the NxtGen Snow White has a yellow undertone. Because of the photobleaching properties, the colour will change to the colour you are used to from Snow White Classic after post curing (or in some cases even more white).

Below some printer settings, this is only an indication, settings depend on colour, print, size and orientation on most machines.

PrinterZ-Layer heightBase layer timeBase layersNormal layers
Slash0.1 mm  3.8s
Photon0.08 mm654-811-11.5s
D-70.05 mm558



© 2012 - 2018 | sitemap | rss | ecommerce software - powered by MyOnlineStore